Discover our capabilities - watch this short video!

TZ-89 1"x4" Clamp ISO, 500mm

Toftejorg TZ-89 Rotary Jet Head with 1" Clamp ISO Inlet connection x 4" Clamp ISO Tank connection, 500mm length Part Number: TE20A056

More details

TE20A056

~Application --- The Toftejorg TZ-89 rotary jet head provides 3D indexed low flow impact cleaning over a defined time period. It is suitable for processing, storage and transportation tanks and vessels between 0.5 and 50 m3 within e.g. the food, ingredient, heath care and pharmaceutical industry. --- Working principle --- The flow of the cleaning fluid makes the nozzles perform a geared rotation around the vertical and horizontal axes. In the first cycle, the nozzles lay out a coarse pattern on the tank surface. The subsequent cycles gradually make the pattern more dense, until a full pattern is reached after 8 cycles. The drive mechanism is located outside the tank or process equipment, leaving a minimum of parts to be submerged into the product. All product contact surfaces are 1.4404 (316L) stainless steel.~
  • Clamp Inlet Connections : 1 inch ISO 2852
  • Clamp Tank Connection : 3 inch / 4 inch ISO 2852
  • Cleaning Device : Rotary Jet Head
  • Flange Tank Connection : 50 ND6 DIN 2501, or 3 inch ANSI B 16.5 ft
  • Impact Cleaning : (model-based - check PD Sheet charts per config) from 08 -13 ft (2.5 - 4 m)
  • Impact Throw Length : 2.5 - 4 m (8 -13 ft)
  • Lubricant : Self-lubricating with the cleaning fluid
  • material(s) : 316L (UNS S1603), Duplex steel (UNS N31803), PTFE, PEEK, FEP/Silicone
  • Max. Ambient Temperature : 140 C (284 F)
  • Max. Throw Length : 4 - 7 m (13 - 23 ft)
  • Max. Working Temperature : 95 C (203 F)
  • Options : Electronic rotation sensor to verify 3D coverage
  • Recommended Pressure : 5 - 6.5 bar (72 - 94 PSI)
  • Surface Finish : Product contact parts Ra 0.8micrometre
  • Thread Inlet Connections : 3/4 inch Rp (BSP) or NPT, male
  • Weight : 5.5 - 8.5 kg (12 - 18.7 lbs)
  • Wetting : (model-based - check PD Sheet charts per config) from 13 - 23 ft (4 - 7 m)
  • Working Pressure : 2 - 7 bar (30 - 100 PSI)