Discover our capabilities - watch this short video!

17" Oval Manway LKD-440x320-060 EPDM 304 - Hinged 3A

Oval Type LKD 440x320 Manway
17" Diameter Hinged Oval Type Manhole Cover LKD-440x320 with 2.36" (60 mm) Neck Height an EPDM Seal and 304 Stainless Steel material - Electro Polished 3A Approved --- Model Number: LKD-440X320-060-E-3A 1.4301 WITH HINGE --- Part Number: 9613437405

More details

9613437405

The Alfa Laval oval manhole cover LKD 440 x 320 is especially used on tanks or containers in the wine and juice industry. Offered with or without hinge. Open the cover by loosening the handle. For inspection purposes the cover can then be turned into the tank. If it is necessary to physically enter the tank, the cover can be removed at the double hinge or swung out of the tank, depending on the model. The seal is hygienically positioned and is not affected by positive or negative pressure in the tank.APPLICATION EXAMPLES: beer champagne conservatories (tomatoes) cosmetics dairy food juices mineral water pharma (asceptic conservation with pressure) wine
  • Application(s) : beer, champagne, conservatories (tomatoes), cosmetics, dairy, food, juices, mineral water, pharma (asceptic conservation with pressure), wine
  • Cover (inch) : 17.32 x 12.6 in (440x320mm)
  • Cover Finish : Internal Ra less than 0.4 (0.016in)
  • Finish : Electro Polished
  • Frame Finish : Internal Ra less than 0.8 (0.031in)
  • Frame Thickness (inch) : 0.314 in (8 mm)
  • INDUSTRY APPLICATION(S) : especially used in the Wine & Juice industry
  • material(s) : 304 Stainless Steel
  • Max. Negative Working Pressure : 0.5 bar (50 kPa)
  • Max. Positive Working Pressure : 0 bar (0 kPa)
  • Max. Static Pressure : 22 PSI (1.5 bar)
  • Max. Temperature : 230 F (EPDM)
  • Min. Temperature : -4 F
  • Neck Height : 2.36 in / 60 mm
  • Placement : Below Liquid Level - on side of tank
  • Plastic Parts : Nylon
  • Pressure : Static
  • Seal : Non Glued - Fixed on Cover
  • Seal Material : EPDM
  • Seals : EPDM
  • Shape : Oval
  • Specification(s) Met : 3A Approved
  • Steel Parts : 1.4301 (304)
  • Surface Finish : 3A Surface Finish - Electro Polished
  • Surface Quality Product Wetted Parts : Ra 0.8μm ... Other Surfaces - Ra 3.0μm
  • Test Pressure : 2.25 bar (225 kPa)