Discover our capabilities - watch this short video!

PF-EG Liquid Filter Housing - sanitary (liquid)

Designed for the purification of liquids in sanitary applications. 3-A certification, available in 316L stainless steel. 12 sizes, flow capacities from 1 to 215 gpm, low differential pressure at high flow rates. Inner & Outer Surface: Electropolished to Ra 32 (Models 0012-0075), Nitric passivated to Ra 32 (Models 0080-0900).

More details

PF-EG (call 1.800.844.6261)

Stainless Steel Filter Housing for Sanitary Applications

Donaldson® PF-EG filter housings are designed for filtration of beverages and other liquids such as process water, mineral water, beer, wine, soft drinks, juice and other products. They are equipped with sanitary Tri-Clamp®* connections and have internal and external electropolished surface finishes of Ra 32. The lowest point of the housings are equipped with pharma valves or Tri-Clamp vent/drain connections. PF-EG housings are designed to yield low differential pressure at high flow rates.

PF-EG filter housings are 3-A certified and are available in over 11 different sizes, offering a wide range of capacity depending on element selection. Our broad selection of filter elements will meet the compatibility and micron rating requirements of your process.

SPECIFICATIONS

3-A SANITARY CERTIFIED

All Models              3-A stamped

MATERIALS

Filter Housing         316L SS

Attachment Parts    304 SS

Housing Gasket      EPDM (PF-EG 0012 to PF-EG 0075), Silicone class VI (PF-EG 0080 and larger), (other gasket materials available)

SURFACE FINISH

SINGLE ROUND  MULTI-ROUND

Internal    Electropolished to: Ra 25 (SINGLE ROUND), Ra 30 (MULTI-ROUND)

External    Electropolished to: Ra 32 (SINGLE ROUND), Ra 30 (MULTI-ROUND)

DESIGN PRESSURE

PF-EG 0012-0075    150 psig at 356°F (with EPDM gaskets)

PF-EG 0080-0900    150 psig at -20-350°F UM code stamp

MAXIMUM INLET TEMPERATURE

300°F with standard EPDM gasket (higher temperature gaskets are available upon request)

CONNECTION TYPES

Tri-Clamp Connection

PF-EG 0012-0075   VENT: 1 1/2" Tri-Clamp with 1/4" BSP Pharma Valve, DRAIN: 1/4" BSP Pharma Valve

PF-EG 0080-0900   VENT: 1/2" Tri-Clamp, DRAIN: 1/2" Tri-Clamp

 

  • Application(s) : liquids, beverages, process water, mineral water, beer, wine, soft drinks, juice and other products
  • Item : Housing
  • Max. Pressure : see tech specs (varies per configuration)
  • Max. Temperature : 300 F with std EPDM gasket
  • Surface Finish : Electropolished SINGLE (Ra25 ID, Ra32 OD), MULTI-(Ra30 ID, OD)