Categories

Discover our capabilities - watch this short video!

SaniMicro There are 20 products.

SaniMicro
Toftejorg SaniMicro Rotary Spray Head
Application
The Toftejorg SaniMicro is a rotary spray head that uses cleaning media to provide coverage and impact. The device represents an effective alternative to traditional static spray balls because it uses low volumes of cleaning fluid at low pressure. The double ball bearing in the Toftejorg SaniMicro’s rotating head makes the device suitable for all industrial cleaning applications, including tanks, reactors, vessels and other containers ranging from 0.05 to 1 m3, depending on dimensions and cleaning task.

Working principle
The flow of the cleaning media causes the head of the Toftejorg SaniMicro to rotate, and the fan-shaped jets lay out a swirling pattern throughout the tank or reactor. This generates the impact needed for the efficient removal of residual product; the cascading flow covers all internal surfaces of the vessel.

TECHNICAL DATA
Lubricant: . . . . . . . . . . . . . . . . . . . Self-lubricating with the cleaning fluid
Wetting radius . . . . . . . . . . . . . . . . Max. 2.5 m
Impact cleaning radius: . . . . . . . . . . Max. effective 0.6 m
Pressure
Working pressure: . . . . . . . . . . . . . 1-3 bar
Recommended pressure: . . . . . . . . . 2 bar

Standard Design
As standard documentation, the Toftejorg SaniMicro can be supplied with a “Declaration of Conformity” for material specifications or 3.1 certification for metallic parts. The device is available in an electropolished version as well as in hastelloy C22 (balls in hastelloy C276) with 3.1 certification for metallic parts.
Certificates
2.2 material certificate, Q-doc, Q-doc incl. FAT & SAT and ATEX.

PHYSICAL DATA
Materials
AISI 316L (UNS S31603). PTFE* (* FDA compliance 21CFR§177.)
Min. tank opening: . . . . . . . . . . . . . 25mm diameter (DN25)
Standard Surface finish: . . . . . . . . . . Ra 0.5μm exterior / Ra 0.8μm internal
Improved Surface finish: . . . . . . . . . . Ra 0.5μm exterior / Ra 0.5μm internal + Electro polished
Temperature
Max. working temperature: . . . . . . . . 95°C
Max. ambient temperature: . . . . . . . . 140°C
Weight: . . . . . . . . . . . . . . . . . . . . 75 g

Connections
- Thread: 3/8” of Rp (BSP), or 3/8” of NPT
- Weld-on: 3/4” of ISO 2037, or DN15 DIN 11850-R1 or R2, or 3/4” of BPE US
- Clip-on: 3/4” of ISO 2037, or DN15 DIN 11850-R1 or R2, or 3/4” of BPE US

Cart  

No products

Shipping $0.00
Tax $0.00
Total $0.00

Check out