Categories

Discover our capabilities - watch this short video!

SaniMidget There are 20 products.

SaniMidget
Toftejorg SaniMidget
The Toftejorg SaniMidget is an efficient replacement for traditional static spray balls as it uses low volumes of liquid at low pressure. The device, particularly well-suited to sanitary applications, can be used in tanks ranging from 0.1 to 10 m3 (27 to 2,700 US gallons). Sizing/selection and installation drawing are available in Alfa Laval CAS tool for Tank cleaning equipment.

Working principle
The flow of the cleaning media causes the head of the Toftejorg SaniMidget to rotate, with fan jets laying out a swirling pattern throughout the vessel. This generates a vibrating impact and cascading flow that covers all internal surfaces of the tank or reactor. The device’s self-cleaning feature is achieved by directing the cleaning media through the rotating bearing track and onto the neck of the elongated head.

Standard Design
As standard documentation, the Toftejorg SaniMidget can be supplied with a “Declaration of Conformity” for material specifications or 3.1.B certification for metallic parts. The device is available in an electro-polished version as well as in hastelloy C22 (balls in hastelloy C276) with 3.1.B certification for metallic parts. ATEX approved, Category 1 for installation in zone 0/20

Materials
Inlet connections: . . . . . . . . . . . . . . .1.4404 (316L)
Bearing race parts: . . . . . . . . . . . . . .SAF 2205 (UNS31803)
Balls: . . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)/PTFE*
Head: . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)
(*FDA approved 21 CFR § 177.1550)

Technical Data
Weight: . . . . . . . . . . . . . . . . . . . . .Thread and clip-on: 0.30 kg (0.66 lbs) On pipe: 0.55/0.90 kg (1.21/1.98 lbs)
Lubricant: . . . . . . . . . . . . . . . . . . . .Self-lubricating with the cleaning fluid
Working pressure: . . . . . . . . . . . . . .1 - 3 bar (14.5 - 44 psi)
Recommended pressure: . . . . . . . . . .2 bar (29 psi)
Max. working temperature: . . . . . . . . .95 °C (203 °F)
Max. ambient temperature: . . . . . . . .140 °C (284 °F)
Wetting radius: . . . . . . . . . . . . . . . . .Max. 3 m (10 ft)
Impact cleaning radius: . . . . . . . . . . .Max. effective 1.4m(4 ft)
Connections: . . . . . . . . . . . . . . . . . .3/4” Rp (BSP) or NPT thread Clip-on or weld-on for pipe: ISO 2037, ASTM A270, BS4825 part 1, DIN11850 R1, DIN11850 R2 & ASME BPE US,

Cart  

No products

Shipping $0.00
Tax $0.00
Total $0.00

Check out