Categories

Discover our capabilities - watch this short video!

SaniMidget Retractor There are 5 products.

SaniMidget Retractor
Toftejorg SaniMidget Retractor

Application
The Toftejorg SaniMidget Retractor is installed where fully automated and validated cleaning can assure higher productivity due to less cleaning time in e.g. spray drying applications within the food, ingredients and pharmaceutical industry. Larger ducts, channels, cyclones, chambers, complexed reactors, vent lines etc. can therefore be cleaned to the highest standards with no manual or semi automated interference, and avoiding any product carry over or hazardous incidents.

Working principle
The Toftejorg SaniMidget Retractor is available with two styles of retracting mechanisms: Pneumatic Driven, which uses air pressure to extend and retract the cleaning head, and Media Driven, which uses the pressure of the cleaning media to extend the cleaning head and an integrated spring to retract it. This creates a fan of fluid in a swirling pattern. The distribution pattern of the cleaner head generates a vibrating impact as well as cascading flow coverage of all internal surfaces of the tank.

TECHNICAL DATA
Lubricant: . . . . . . . . . . . . . . Self-lubricating with the cleaning media
Wetting radius: . . . . . . . . . . .Max. 3.5 m
Impact cleaning radius: . . . . . Max. effective 1.7 m
Air quality: . . . . . . . . . . . . . .Clean, filtered max. 40μm Dry, dew point max. 10°
Installation: . . . . . . . . . . . . . Please contact Alfa Laval for installation of the tank cleaning machine
Pressure
Working pressure: . . . . . . . . 2-5 bar
Recommended pressure: . . . . 2-4 bar
Air supply pressure: . . . . . . . 2-5 bar
Standard Design
The Toftejorg SaniMidget Retractor is available in three stroke lengths: 100 mm, 150 mm and 250 mm, in either pneumatic- or media-driven versions.
Certificates
2.2 or 3.1 material certificate or ATEX.

PHYSICAL DATA
Materials
Product area: . . . . . . . . . . . .316L (UNS S31603), PEEK*
Non-product area: . . . . . . . . .304 (UNS S30400), POM
Sealing: . . . . . . . . . . . . . . .EPDM*
* FDA compliance 21CFR§177
Surface finish: . . . . . . . . . . .Product contact surfaces: Ra 0.8μm
Standard Surface finish: . . . . .Product contact parts Ra 0.8μm - Non product contact parts Ra 1.6μm
Temperature
Max. working temperature: . . .95°C
Max. ambient temperature: . . .150°C
Connections
1. Tank connections - 2. Cleaning media 1" Clamp ISO 2852 - 3. Air supply - pneumatic driven only ISO 228-G 1/8 - 4. Option Magnetic sensor - 5. Adjustable valve - media driven only
Options
A. Hastelloy C22 in product contact part - B. Alternative sealing component material, FPM*, FFKM* - C. Positioning sensors, which generate digital signals at the fully retracted or fully extended positions - D. 3.1. certificate for metallic parts available upon request(* FDA compliance 21CFR§177)

Cart  

No products

Shipping $0.00
Tax $0.00
Total $0.00

Check out