Categories

Discover our capabilities - watch this short video!

SaniMagnum There are 25 products.

SaniMagnum
Toftejorg SaniMagnum
Application
The Toftejorg SaniMagnum is an efficient replacement for traditional static spray balls as it uses low volumes of liquid at low pressure. The device, particularly well-suited to sanitary applications, can be used in tanks ranging from 5 m3 to 50 m3 (1,300 to 13,000 US gallons). Sizing/selection and installation drawing are available in Alfa Laval CAS tool for Tank cleaning equipment.

Working principle
The flow of the cleaning media causes the head of the Toftejorg SaniMagnum to rotate, with fan jets laying out a swirling pattern throughout the vessel. This generates a vibrating impact and cascading flow that covers all internal surfaces of the tank or reactor. The device’s self-cleaning feature is achieved by directing the cleaning media through the rotating bearing track and onto the neck of the elongated head.

Spray Pattern
360° and 360° LF --- 270° and 270° up LF** --- 180° down

Materials
Inlet connections: . . . . . . . . . . . . . . .1.4404 (316L)
Bearing race parts: . . . . . . . . . . . . . .SAF 2205 (UNS31803)
Balls: . . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)/PTFE*
Head: . . . . . . . . . . . . . . . . . . . . . .1.4404 (316L)
(*FDA approved 21 CFR § 177.1550)

Technical Data
Weight: . . . . . . . . . . . . . . . . . . . . .Thread and clip-on: 0.76 kg (1.48 lbs) On pipe: 0.97/1.52 kg (2.14/3.35 lbs)
Lubricant: . . . . . . . . . . . . . . . . . . . .Self-lubricating with the cleaning fluid
Working pressure: . . . . . . . . . . . . . .1 - 3 bar (14.5 - 44 psi)
Recommended pressure: . . . . . . . . . .2 bar (29 psi)
Max. working temperature: . . . . . . . . .95 °C (203 °F)
Max. ambient temperature: . . . . . . . .140 °C (284 °F)
Wetting radius: . . . . . . . . . . . . . . . . .Max. 3 m (10 ft)
Impact cleaning radius: . . . . . . . . . . .Max. effective 2m(6 ft)
Connection: . . . . . . . . . . . . . . . . . .1 1/4” Rp (BSP) or NPT thread. Clip-on or weld-on for pipe: ISO 2037, ASTM A270, BS4825 part 1, DIN11850 R1, DIN11850 R2, ASME BPE US & Schedule 40 pipe

Cart  

No products

Shipping $0.00
Tax $0.00
Total $0.00

Check out